EGNR - Hawarden 1.0.5+scenery分流
解压密码（PassWord）无EGNR+EGNRscenery 提取码bhj6In addition we have made custom ortho imagery, which includes a custom mesh for the airport. We suggest using this ortho if you are looking for the most accurate runway contour. If you are not using our ortho provided, there is also compatibility with orbx TE, as well as a version of the scenery which is flattened if you choose to use no ortho at all. Optional: Download Ortho and Overlay If you haven't gotten it yet, the iniBuilds Beluga is the perfect compliment to this beautifully quirky airport. Features
[*]Fully custom buildings
[*]Custom ground markings with accurate dirt and grunge
[*]3d grass
[*]Fully modeled Beluga Line Station (BLS), completely compatible with the iniBuilds Beluga
[*]AI traffic network, compaible with WT3 and Traffic Global
[*]SAM marshallers and SAM integration with the BLS
[*]Optional ortho and mesh
[*]Optional fictional version for use with online networks
Required Libraries
[*]MisterX Library v1.61+
[*]RA Library
[*]SAM v2.0+
Installation Instructions:Download and move "egnr-hawarden-1.x.x" (and if you are installing the optional ortho, also "yEGNR-Hawarden-Overlay" and "zEGNR-Hawarden-Ortho") folder(s) into your custom scenery folderUse xOrganizer, or delete your scenery_packs.ini to adjust your scenery load order if using our provided ortho. If you have issues with the scenery loading, most likely your load order is wrong or you are missing the RA library.How to use the Beluga Line Station (BLS)
[*]Upon landing, taxi to either the the beluga apron (diamond shaped area) or holding point 1 just in front of the BLS.
[*]Show down your engines
[*]Open the SAM menu and under the "controls" page, open both sets of BLS doors
[*]Call Better Pushback and direct it to tow you into the building. Note: there are alignment markers where your main gear goes in the red striped area outside the BLS.
[*]Get towed into the BLS and disconnect the tow.
[*]Close the BLS doors. You only need to close the ST doors, but you can close both if you want since the fuselage of the ST is smaller than the XL.
To leave the BLS, perform the same steps in reverse. Command better pushback to put you on the beluga apron for startup.Parking LocationsBetter Pushback PositionBetter Pushback Reference MarkersScenery Versions
[*]Standard - This is the most realistc version and is the default version installed
[*]Standard Flattened - This is the same as standard, except the terrain is flattened. This is helpful if you are not using ortho to avoid floating buildings due to mesh issues.
[*]Online Network - This version includes the fictional victor ramp. This ramp adds 10 parking positions for the Beluga and is useful if you are flying on VATSIM/IVAO/etc. with high traffic. The real airport only has enough capcity for 1 beluga arrival every 30 minutes, this apron allows for more aircraft movements.
[*]Online Network Flattened - This is the same as the Online Network version, but with the airport terrain flattened for use without ortho or if your mesh is bad.
How to change scenery versions
[*]Make sure xplane is closed
[*]Go to the "Scenery Variants" folder and open the version you want to install
[*]Copy the "Earth nav data" folder into the main EGNR-Hawarden folder. Select "yes" when prompted to overwrite the existing files.
[*]Launch xplane
Citations/CreditsWorld Imagery (orthophotos)Esri. "Imagery" . Scale Not Given. "World Imagery". January 21, 2021. https://www.arcgis.com/home/item.html?id=10df2279f9684e4a9f6a7f08febac2a9. (February 18, 2021).MisterX LibraryRA LibrarySAM LibraryiniBuildsZDP Developers: StableSystem, awsfiu, TJPlease report any bugs on the Zero Dollar Payware discord or on the official forum thread (linked above)To conctact us about this repo please send a message on the orgThis repository and it's contents are protected under CC BY-NC 4.0 Assets used from other developers was done so with their knowledge and approval.Gitlab Repository in the event you want to download a older releaseDownload Size: 1.4GBEdited yesterday at 08:45 AM by StableSystemWhat's New in Version 1.0.5Released Yesterday at 08:45 AMadded performance optimized version for users with poor FPS每次机翻的都比较尴尬这次就直接发原文了需要的依赖库：MisterX LibraryRA LibrarySAM LibraryPS：图片过大上传不了，想预览的访问inibuilds官网查看http://www.fsx.org.cn/static/image/admin/fsx.pnghttp://www.fsx.org.cn/static/image/admin/fsxs.pnghttp://www.fsx.org.cn/static/image/admin/v2.jpghttp://www.fsx.org.cn/static/image/admin/v3.jpghttp://www.fsx.org.cn/static/image/admin/v4.jpghttp://www.fsx.org.cn/static/image/admin/v4all.jpghttp://www.fsx.org.cn/static/image/admin/10.pnghttp://www.fsx.org.cn/static/image/admin/11.png 免费分享谢谢你
页:
[1]