donmesito 发表于 2019-06-18 21:00:01

FSX Fiber Accelerator

Editado por donmesito en 2019-06-20 21:23

https://3.bp.blogspot.com/-hX5arnI04kY/VTot7z8k6yI/AAAAAAAAArU/JMlnmCFznX8/s1600/FSPS-FSX-Fiber-Accelerator.jpg


How it Works      Essentially, what Fiber Accelerator does is update the fsx.cfg with the optimal settings for you current situation. Which sounds simple enough, except that it does this every millisecond!
      The steps to get it all working are pretty straight forward. Set a “Target Frames” with FSX, then set a “Low FPS Target” with Fiber Accelerator and head out to one of the spots that brings your FPS to its knees. Then simply peruse the various settings and tweak them until you find what works for you. You can do the same with a “Mid FPS Target” and tweak the settings for slightly less demanding situations.
      In an effort to reach the FPS targets that you set, Fiber Accelerator will gradually lower lower graphic quality until it matches the frame rate you set. Using revolutionary techniques, Fiber Accelerator is able to draw power from where it's not needed. For instance, when on the ground in a frame-killer airport, it will lower graphic quality from the edge of your draw distance, say 80 miles away, where you wouldn't even notice. By the same token, it can redirect your computers resources to improve graphical quality when you're, in effect, exceeding your target FPS.
      Once you're happy with the settings for each benchmark, you never need edit Fiber Accelerator again. Just launch it alongside FSX and enjoy performance gains across the board and on the fly!
      Of course, a full PDF is included so that you can understand exactly how Fiber Accelerator can work for you and what changes can bring you the best results. There are also numerous online resources where you can get recommendations pertaining to your specific set up.
      There are only two provisos through all of this. The first is that you must already be able to run FSX on your computer and the second is that Fiber Accelerator must be installed on the same system as FSX, in order for it to be able to communicate with it directly.
      FSPS have created an incredible product has the power to dynamically apply the best tweaks to your FSX every millisecond. Making sure that you maintain the best graphics quality, the smoothest texture loading and the highest FPS that your computer is capable of by cleverly monitoring CPU and GPU allocation at all times. In essence, Fiber Accelerator is a new plug and play graphics engine, that works harder and smarter than its predecessor.      
https://pan.baidu.com/s/1731dlaQx3x_2GpQ1sa9xoAkscq]|4



解压密码（PassWord）→http://www.fsx.org.cn/←
http://www.fsx.org.cn/static/image/admin/fsx.pnghttp://www.fsx.org.cn/static/image/admin/fsxs.pnghttp://www.fsx.org.cn/static/image/admin/v2.jpghttp://www.fsx.org.cn/static/image/admin/v3.jpghttp://www.fsx.org.cn/static/image/admin/v4.jpghttp://www.fsx.org.cn/static/image/admin/v4all.jpghttp://www.fsx.org.cn/static/image/admin/10.pnghttp://www.fsx.org.cn/static/image/admin/11.png

393131147 发表于 2019-06-24 08:13:39

本帖最后由 393131147 于 2019-06-24 08:18 编辑

http://www.fsx.org.cn/forum.php?mod=image&aid=19161&size=300x300&key=a6b972cd2e308f2c&nocache=yes&type=fixnone打开显示Please choose another value at FSX Options, for Target Frame . Unimited cannot be accepted.请问怎么解决

ROCAF-TW 发表于 2019-06-19 10:39:43

請問樓主，此插件能用在P3D v4.5嗎?

FSA4703 发表于 2019-06-19 14:57:47

static/image/common/user_online.gif ROCAF-TW static/image/common/clock.gif 2019-06-19 10:39
請問樓主，此插件能用在P3D v4.5嗎?

可以试试，换成P3D.cfg

FSA4703 发表于 2019-06-19 15:09:50

本帖最后由 FSA4703 于 2019-06-20 12:48 编辑

为什么不用百度云盘，打不开，坑我4个金币

donmesito 发表于 2019-06-19 21:42:08

static/image/common/user_online.gif FSA4703 static/image/common/clock.gif 2019-06-19 15:09
为什么不用百度云盘，根本打不开，坑我4个金币
这帖子是这么审核通过的

对不起，我是新人，我正在学习

donmesito 发表于 2019-06-19 21:42:54

static/image/common/user_online.gif ROCAF-TW static/image/common/clock.gif 2019-06-19 10:39
請問樓主，此插件能用在P3D v4.5嗎?

仅在fsx上测试过

393131147 发表于 2019-06-19 22:25:42

本帖最后由 393131147 于 2019-06-19 22:34 编辑

有百度云链接吗

donmesito 发表于 2019-06-20 00:12:18

static/image/common/user_online.gif 393131147 static/image/common/clock.gif 2019-06-19 22:25
本帖最后由 393131147 于 2019-06-19 22:34 编辑

有百度云链接吗

还没有，我正在学习

FSA4703 发表于 2019-06-20 12:51:32

我翻墙下好了并上传到了百度云盘

链接：https://pan.baidu.com/s/1731dlaQx3x_2GpQ1sa9xoA
提取码：kscq

keikei_dst 发表于 2019-06-20 16:44:00

那玩意没啥意义，而且只用在FSX上，他们又P3D版本卖，所以别瞎试了

donmesito 发表于 2019-06-20 21:20:30

static/image/common/user_online.gif FSA4703 static/image/common/clock.gif 2019-06-20 12:51
我翻墙下好了并上传到了百度云盘

链接：https://pan.baidu.com/s/1731dlaQx3x_2GpQ1sa9xoA


谢谢

lzyccyb 发表于 2019-06-24 22:37:31

感谢分享！！！

BSTYIN 发表于 2020-07-05 10:17:25

同楼上；我下载安装完了，FSX平台。感觉没什么用。可以设定在最底FPS与最高FPS之间运行程序，但是我感觉并没有帧数的提高。

damian999 发表于 2020-07-22 22:20:57

thanks for sharing

kim0517 发表于 2020-08-22 00:01:53

这是最新V1.5.1.0版本吗

jinsig 发表于 2021-02-14 23:03:54

ypq1819 发表于 2024-10-21 19:40:52

FSA4703 发表于 2019-06-20 12:51
我翻墙下好了并上传到了百度云盘

链接：https://pan.baidu.com/s/1731dlaQx3x_2GpQ1sa9xoA


怎么翻墙求教翻墙
页: [1]
查看完整版本: FSX Fiber Accelerator